|
| ES4710BD 10 Slots L2/L3/L4 Chassis Switch | |||
50.1.1.9 |
| Vlan50 | Ethernet1/1 | Static | |
150.1.1.2 |
| Vlan150 | Ethernet3/4 | Dynamic | |
|
|
|
|
| |
Displayed information |
| Explanation |
|
| |
Total arp items |
|
| Total number of Arp entries. |
| |
the matched |
|
| ARP entry number matching the filter conditions | ||
InCompleted |
|
| ARP entries have ARP request sent without ARP reply | ||
Address |
|
| IP address of Arp entries |
| |
Hardware Address |
|
| MAC address of Arp entries |
| |
Interface |
|
| Layer 3 interface corresponding to the ARP entry. | ||
Port |
|
| Physical (Layer2) interface corresponding to the ARP | ||
|
|
| entry. |
|
|
Flag |
|
| Describes whether ARP entry is dynamic or static. | ||
17.3.3.1.2clear arp-cache
Command: clear arp-cache
Function: Clears arp table.
Parameters: N/A.
Command mode: Admin Mode
Usage Guide: Clears the content of current ARP table, but it does not clear the current static ARP table.
Example：
Switch#clear
17.3.3.1.3debug arp
Command: debug arp no debug arp
Function: Enables the ARP debugging function; the “no debug arp” command disables this debugging function.
Default: ARP debug is disabled by default.
Command mode: Admin Mode
Usage Guide: Display contents for ARP packets received/sent, including type, source and destination address, etc.
Example: Enabling ARP debugging Switch#debug arp
ip arp debug is on
Switch#%Apr 19 15:59:42 2005 IP ARP: rcvd, type 1, src 192.168.2.100, 000A.EB5B. 780C, dst 192.168.2.1, 0000.0000.0000 flag 0x0.
%Apr 19 15:59:42 2005 IP ARP: sent, type 2, src 192.168.2.1, 0003.0F02.310A, dst 192.168.2.100, 000A.EB5B.780C.
375
