ViewSonic VTMS2431 warranty Set-Function description, Set-Function format Send Command Type= s

Other Information

3. Command Description

	Length	Total Byte of Message excluding “CR”
	TV ID	Identification for each of TV
	Command Type	Identify command type,
		“s” (0x73h) : Set Command
		“g” (0x67h) : Get Command
ENGLISH
		“r” (0x72h) : Reply Command
		“p” (0x70h) : RCU Pass-through
		“+” (0x2Bh) : Valid command Reply
		“-” (0x2Dh) : Invalid command Reply
	Command	Function command code: One byte ASCII code
	Value[1~3]	Three bytes ASCII that defines the value
	CR	0x0D

4. Set-Function Listing

The PC can control the LCD Monitor for specific actions. The Set-Function command allows you to control the LCD monitor behavior in a remote sit through the RS232 port. The Set-Function packet format consists of 11 bytes.

Set-Function description:

Length		Total Byte of Message excluding “CR”
TV ID		Identification for each of TV. The TV ID doesn’t be supported by
		HDTV “power on” command.
		If we want to set all TV settings, TV ID can use “99” to achieve, and it
		will not have Reply command on this function.
Command Type		Identify command type,
		“s” (0x73h) : Set Command
Command		Function command code: One byte ASCII code
Value[1~3]		Three bytes ASCII that defines the value
CR		0x0D
Set-Function format:
Send (Command Type= “s”)
Name	Length		ID	Command	Command	Value1	Value2	Value3	CR
				Type
Byte Count	1 Byte		2 Byte	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte
Bytes order	1		2~3	4	5	6	7	8	9
(Command Type= “s”, Only for HDTV power on)
Name	Length		Command	Command	Value1	Value2	Value3	CR
			Type
Byte Count	1 Byte		1 Byte	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte
Bytes order	1		2	3	4	5	6	7

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic 46 VTMS2431