Accton Technology ES4710BD manual Ip pim bsr-candidate, Ip pim rp-candidate

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

specified period, that neighbor is considered to be lost. This time setting must be no greater than the neighbor timeout time.

Example: Configuring PIM-SM HELLO interval on interface vlan1. Switch (Config)#interface vlan 1 Switch(Config-If-Vlan1)#ip pim query-interval 20

19.4.2.2.4ip pim bsr-candidate

Command: ip pim bsr-candidate <ifname> [hash-mask-length] [priority] no ip pim bsr-candidate

Function: This command is a global candidate BSR configuration command. It is used to configure information for PIM-SM candidate BSR and to contend for the BSR router with the other candidate BSRs; the “no ip pim bsr-candidate” command cancels the BSR configuration.

Parameters: ifname is the name of the specified interface; [hash-mask-length]is the mask length of the specified hash algorithm used in RP boot selection, ranging from 0 to 32; [priority] is the BSR priority of this candidate BSR, ranging from 0 to 255, if this parameter is omitted, the priority of this candidate BSR will be defaulted to 0.

Default: The switch is not a BSR candidate router by default.

Command mode: Global Mode

Usage Guide: This command is a global candidate BSR configuration command. It is used to configure information for PIM-SM candidate BSR and to contend for the BSR router with the other candidate BSRs. The switch will be a BSR candidate router only when this command is configured.

Example: Setting the interface vlan1 as the BSR message sending interface. Switch (Config)# ip pim bsr-candidate vlan1 30 10

19.4.2.2.5ip pim rp-candidate

Command: ip pim rp-candidate <ifname> [group-list access-list] [interval interval] no ip pim rp-candidate [<ifname>]

Function: This command is a global candidate RP configuration command. It is used to configure information for PIM-SM candidate RP and to contend for the RP router with the other candidate RPs; the “no ip pim rp-candidate [<ifname>]” command cancels the RP configuration.

Parameters: <ifname> is the name of specified interface; access-listis the number of group range list can be used as the RP in the switch, ranging from 1 to 99, if this parameter is omitted, the router can work as the RP for all multicast groups; interval is the interval for the local candidate RP to send C-RP packets, ranging from 1 to 16383 seconds.

Default: The switch is not a BSR candidate router by default.

Command mode: Global Mode

Usage Guide: This command is a global candidate RP configuration command. It is used to configure information for PIM-SM candidate RP and to contend for the RP router with the other candidate RPs. The switch will be a RP candidate router only when

472