Accton Technology ES4710BD manual Apply QoS to port, Port trust mode configuration

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Example: Apply the aggregate policer agg1 by c1 class-map, input the graphic presentation value, and then click Add.

16.5.4 Apply QoS to port

Click “Apply QoS to port” to enter the configuration page, which include four sections:

zPort trust mode configuration

zPort default CoS configuration

zApply policy-map to port

zApply DSCP mutation mapping

16.5.4.1 Port trust mode configuration

Click “Port trust mode configuration” to enter the configuration page. Equivalent to CLI command 16.2.2.10.

Terms are described as following:

zPort

zPort trust status－including

9 cos, cos and pass-through-dcsp,

9 dcsp, dcsp and pass-through-cos,

9 ip-precedence, ip-pre and pass-through-cos

zPort priority

zReset－Will set column as startup defaults. This command will not modify the configuration.

zApply－Will take effort to all setting. This command will modify the configuration.

zDefault－Will back to startup setting. This command will modify the configuration.

The parameter will take effect alternative port trust status and port priority.

Example: Configuring the Ethernet port 1/1 with trust mode, setting packet as COS value classification first and keep it without changing DSCP value. Choosing the Ethernet1/1 port and select the cos and pass-through-dcsp for Port trust status, then click Apply.

361