ES4710BD 10 Slots L2/L3/L4 Chassis Switch

18.5.3.3 OSPF imported route parameter configuration

Click “OSPF Imported route parameter configuration” to open the configuration table, includes:

zImported route parameter configuration: configure imported route default parameter

zImport external routing information: configure other imported protocol in OSPF

18.5.3.3.1 Imported route parameter configuration

Click “Imported route parameter configuration” to enter the configuration page.

zDefault imported route type: default imported route type. 1 means the first type external route and 2 means the second type external route. Equivalent to CLI command 18.4.2.2.5

zDefault imported route tag: default imported route tag. Equivalent to CLI command 18.4.2.2.4

zDefault imported route cost: Default imported route cost. Equivalent to CLI command 18.4.2.2.1

zImported route interval: imported route interval. Equivalent to CLI command 18.4.2.2.2

zMaximum imported route: maximum imported route at once. Equivalent to CLI command 18.4.2.2.3

zReset: resets each column value to default in this page and this action will not change settings

zApply: valid each column value. This action will change settings.

zDefault: resets to default settings. This action will change settings.

18.5.3.3.2 Import external routing information

Click “Import external routing information” to enter configuration page. Equivalent to CLI command 18.4.2.2.17

zImported type: includes Static, RIP, connected direct route and BGP as external route information

zType: specify external route type, 1 means the first type external route and 2 means the second type external route

zTag: specifies route tag

zMetric value: specifies route value

453

Page 454
Image 454
Accton Technology ES4710BD manual Ospf imported route parameter configuration, Imported route parameter configuration