Accton Technology ES4710BD Device Management Brief, Device Management Configuration, Show slot

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Chapter 6 Device Management

6.1Device Management Brief

The device management function of ES4710BD provides information about line card status, line card operation debugging, power supply and fan status. This function enables the maintenance and management of the physical devices and restart of the switch and line cards, and hot swapping of the cards. ES4710BD supports dual-master mode. If 2 master control boards are present in the system, the master control board in the smaller slot number becomes the Active Master and the other board becomes the Standby Master.

6.2Device Management Configuration

5.6.1SWITCH BASIC CONFIGURATION

Command: reset slot <slotno>

Function: Resets specified card.

Parameters: < slotno> is the slot number, or the card located in that slot, the valid range is 1 to 4, M1, M2, and 5 to 8.

Command mode: Admin Mode

Usage Guide: This command can reset all line cards and Standby Master board, but not the Active Master board.

6.2.2Device Management Troubleshooting Help

6.2.2.1Monitor and Debug Commands

6.2.2.1.1show slot

Command: shows slot [<slotno>]

Function: Shows basic information of the specified card.

Parameters: < slotno> is the slot number, or the card located in that slot, the valid range is 1 to 4, M1, M2, and 5 to 8.

Default: If no slotno is specified, information for all cards is listed by default.

Command mode: Admin Mode

151