Accton Technology ES4710BD manual Debug aaa, Command debug aaa no debug aaa

		ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Supplicant	00-03-0F-FE-2E-D3
Authenticator State Machine
State	Authenticated
Backend State Machine
State	Idle
Reauthentication State Machine
State	Stop
Displayed information		Explanation
Global 802.1x Parameters		Global 802.1x parameter information
reauth-enabled		Whether re-authentication is enabled or not
reauth-period		Re-authentication interval
quiet-period		Silent interval
tx-period		EAP retransmission interval
max-req		EAP packet retransmission interval
authenticator mode		Switch authentication mode
Mac Filter		Enables dot1x address filter or not
MacAccessList		Dot1x address filter table
dot1x-EAPoR		Authentication method used by the switch (EAP relay, EAP
		local end)
802.1x is enabled on ethernet 1		Indicates whether dot1x is enabled for the port
Authentication Method:		Port authentication method (MAC-based, port-based)
Status		Port authentication status
Port-control		Port authorization status
Supplicant		Authenticator MAC address
Authenticator State Machine		Authenticator state machine status
Backend State Machine		Backend state machine status
Reauthentication State Machine		Re-authentication state machine status

20.4.1.6debug aaa

Command: debug aaa no debug aaa

Function: Enables AAA debugging information; the “ no debug aaa” command disables the AAA debugging information.

Command mode: Admin Mode

Parameters: N/A.

Usage Guide: Enabling AAA debugging information allows the check of RADIUS negotiation

526