ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Apply to add the group.

After finishing the group configuration, the configured port information will be shown under the configuration table.

13.5.2LACP port configuration

Click LACP port configuration to enter configuration page

Equivalent to CLI command 13.2.2.2

zgroup num

zPort: will be added or deleted

zPort mode: active, passive or on

zOperation type: add port to group or remove port from group

Fill up group num, select Port and Port mode, operation type as add or to group. Click Apply button to add port into the group.

Display port member

Select a group num in port configuration and the information of port member will be shown under the configuration table. Equivalent to CLI command 13.4.1.1.

zPort: name of port member

zPort mode: active or passive

296

Page 297
Image 297
Accton Technology ES4710BD manual Lacp port configuration, Display port member