ES4710BD 10 Slots L2/L3/L4 Chassis Switch

9.5.1.4Trunk port configuration

Click “Vlan configuration”, “Vlan configuration”, “Trunk port configuration” to open Trunk port VLAN configuration list.

9.5.1.4.1Vlan setting for trunk port

Click “Vlan configuration”, “Vlan configuration”, “Trunk port configuration”, “Vlan setting for trunk port” to set up trunk port VLAN type:

Set trunk native vlan. Equals to CLI command 9.2.2.7:

zPort: specifies port

zTrunk native vlan: specifies native vlan id

zOperation type: Sets native vlan means to add new VLAN; Remove native vlan means to remove original native vlan.

Example: Select port 2/8, set up Trunk native vlan as 100, select Operation type as Set native vlan and click the Set button so that the native vlan setting of port 2/8 will be vlan 100.

zSet trunk allow vlan. Equals to CLI command 9.2.2.6:

zPort: specified port

zTrunk allow vlan list: specifies allow vlan id list

zOperation type: Sets allow vlan means to add new allow VLAN; Remove allow vlan means to delete allow vlan

220

Page 221
Image 221
Accton Technology ES4710BD manual Trunk port configuration, Vlan setting for trunk port