Dell Command Line Interface Omconfig Online Physical Disk, Omconfig Assign Global Hot Spare, 172

Example for SCSI, SATA, and ATA Controllers:

To offline the physical disk described in this example, enter:

omconfig storage pdisk action=offline controller=1 pdisk=0:3

Example for SAS Controllers:

To offline the physical disk described in this example, enter:

omconfig storage pdisk action=offline controller=1 pdisk=0:2:3

omconfig Online Physical Disk

Use the following omconfig command syntax to bring an offline physical disk back online.

Complete Syntax

omconfig storage pdisk action=online controller=id pdisk=<PDISKID>

where id is the controller ID. The <PDISK> variable specifies the physical disk.

To obtain these values, you would enter omreport storage controller to display the controller IDs and then enter omreport storage pdisk controller=ID to display the IDs for the physical disks attached to

the controller.

Example Syntax

In this example, you want to bring physical disk 3 on connector 0 of controller 1 back online. On a SAS controller, the physical disk resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers:

To bring the physical disk described in this example back online, enter:

omconfig storage pdisk action=online controller=1 pdisk=0:3

Example for SAS Controllers:

To bring the physical disk described in this example back online, enter:

omconfig storage pdisk action=online controller=1 pdisk=0:2:3

omconfig Assign Global Hot Spare

Use the following omconfig command syntax to assign a physical disk as a global hot spare.

Complete Syntax

omconfig storage pdisk action=assignglobalhotspare controller=id pdisk=<PDISKID> assign=yes

where id is the controller ID. The <PDISK> variable specifies the physical disk.

172

Using the Storage Management Service