Dell Command Line Interface manual Adding Warranty Information, 112

Adding Warranty Information

Use the omconfig system warranty command to assign values for warranty information. A warranty is a contract between the manufacturer or dealer and the purchaser of a system. The warranty identifies the components that are covered for repair or replacement for a specified length of time or usage. For details on how to edit extended warranty values, see "Adding Extended Warranty Information." Table 5-11 shows the valid parameters for adding warranty information.

Table 5-11. omconfig system assetinfo info=warranty

Command	Command	Command	name=value pair 1 name=value	Use
level 1	level 2	level 3	pair 2

omconfig

system

assetinfo

info=warranty

cost=<cost>	Cost of the warranty service.
duration=	Number of days or months that the
<duration>	warranty is in force.
enddate=	Date the warranty agreement ends.
<enddate>
unit=days	Whether the number for duration refers to
months	days or months.

Example Command for Adding Warranty Information

To provide a value for a warranty parameter, type a command of the form: omconfig system assetinfo info=warranty <name=value pair 2>. For example, type:

omconfig system assetinfo info=warranty unit=days

The following message appears:

Asset information set successfully.

You can enter more than one omconfig system assetinfo command at the same time, as long as all of the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see "Example Commands for Adding Acquisition Information."

112

omconfig system assetinfo: Editing Cost of Ownership Values