Dell Command Line Interface manual Help With the omconfig Command

Table 4-1. omconfig Command Level 1, Level 2, and Level 3 (continued)

Command	Command	Command	User privilege	Use
level 1	level 2	level 3	required
		memorymode	A	Enables or disables the spare bank and
				mirroring memory modes, and also specify
				which mode to use.
		remoteaccess	A	Configures remote access information.
		temps	P, A	Sets warning threshold values by default or
				value.
				NOTE: You cannot change threshold values on
				ESM3 and PowerEdge x8xx systems.
		volts	P, A	Sets warning threshold values by default or
				value.
				NOTE: You cannot change threshold values on
				ESM3 and PowerEdge x8xx systems.
	storage			See "Using the Storage Management Service."

Help With the omconfig Command

Use the omconfig -?command to get a list of the available commands for omconfig.

Use omconfig <command level 2> -?to get help on the level 2 commands about, chassis, preferences, and system. The following information on omconfig system -?applies equally to getting help for the omconfig chassis command.

Use the omconfig system -?command to get a list of the available commands for omconfig system.

Use the omconfig preferences -?command to get a list of the available commands for omconfig preferences, such as cdvformat, which is the custom delimiter format (cdv). Type the following command to display the list of delimiter values for the cdv:

omconfig preferences cdvformat -?

Use a command of the form omconfig system <command level 3> -?to get a list of the parameters you must use to execute a particular omconfig system command. For example, the following commands produce a list of valid parameters for omconfig system alertaction and omconfig system shutdown:

omconfig system alertaction -?

omconfig system shutdown -?

In the case of the omconfig system alertaction command, you can use various options to prevent all of the CLI help from scrolling by before you can read it.

54

omconfig: Managing Components Using the Instrumentation Service