Dell Command Line Interface manual Systems, Channel, to Administrator, To Operator

Table 4-3. omconfig chassis bmc (continued)

name=value pair 1	name=value pair 2	Description
config=
config=serialoverlan	enable=true false	true: Enables serial over LAN for the BMC.
		false: Disables serial over LAN for the BMC.
	baudrate=9600 19200 38400	9600: Sets the volatile and nonvolatile
	57600 115200	connection speed to 9600 bits per second.
		19200: Sets the volatile and nonvolatile
		connection speed to 19200 bits per second.
		38400: Sets the volatile and nonvolatile
		connection speed to 38400 bits per second.
		57600: Sets the volatile and nonvolatile
		connection speed to 57600 bits per second.
		115200: Sets the volatile and nonvolatile
		connection speed to 115200 bits per second.
		NOTE: Baud rates of 9600 and 19200 are
		supported on PowerEdge 1800, 1850, 2800, and
		2850 systems.
		Baud rates of 9600, 19200, and 57600 are
		supported on PowerEdge x9xx systems.
		Baud rate of 115200 is supported on certain
		systems that have a DRAC 5 installed.
	privilegelevel=administrator operator	administrator: Sets the maximum privilege
	user	level that can be accepted on a serial over LAN
		channel, to Administrator.
		operator: Sets the maximum privilege level that
		can be accepted on a serial over LAN channel,
		to Operator.
		user: Sets the maximum privilege level that can
		be accepted on a serial over LAN channel, to
		User.
config=settodefault		Takes the default configuration settings.

66

omconfig: Managing Components Using the Instrumentation Service