Dell Command Line Interface Screen, Ready to accept another command, Lineediting=enabled disabled

Table 4-3. omconfig chassis bmc (continued)

name=value pair 1	name=value pair 2	Description
config=
config=terminalmode	deletecontrol=outputdel	outputdel: BMC outputs a <del> character
	outputbkspspbksp	when <bksp> or <del> is received.
		outputbkspspbksp: BMC outputs a
		<bksp><sp><bksp> character when
		<bksp> or <del> is received.
	echocontrol=enabled disabled	enabled: Enables characters to be sent to the
		screen.
		disabled: Disables characters to be sent to the
		screen.
	handshakingcontrol=enabled disabled enabled: Directs the BMC to output a character
		sequence that indicates when its input buffer is
		ready to accept another command.
		disabled: Does not direct the BMC to output a
		character sequence that indicates when its
		input buffer is ready to accept another
		command.
	inputlinesequence=cr null	cr: The console uses <CR> as a new line
		sequence.
		null: The console uses <NULL> as a new line
		sequence.
	lineediting=enabled disabled	enabled: Enables line editing as a line is typed.
		disable: Disables line editing as a line is typed.

newlinesequence=none crlf null cr lfcr lf

none: BMC does not use a termination sequence.

crlf: BMC uses <CR-LF> as a new line sequence when the BMC writes a new line to the console.

null: BMC uses <Null> as a new line sequence when the BMC writes a new line to the console.

cr: BMC uses <CR> as a new line sequence when the BMC writes a new line to the console.

lfcr: BMC uses <LF-CR> as a new line sequence when the BMC writes a new line to the console.

lf: BMC uses <LF> as a new line sequence when the BMC writes a new line to the console.

omconfig: Managing Components Using the Instrumentation Service

67