Dell Command Line Interface Omreport Enclosure Status, Omreport Temperature Probe Status, 140

Table 8-7. omreport Connector Commands (continued)

Required Command Levels (1, 2, 3) Optional name=value pairs	Use
controller=id	Displays information for the specified
where id is the controller	connector on the controller.
number. For example:
controller=0
connector=id
where id is the connector
number. For example:
connector=0

omreport Enclosure Status

Table 8-8. omreport Enclosure Commands

Required Command Levels (1, 2, 3) Optional name=value pairs	Use
omreport storage enclosure	Displays property information for
	all enclosures attached to the
	system.
controller=id enclosure=	Displays the specified enclosure
<ENCLOSUREID>	and its components.
where id is the controller number
and the enclosure number. For
example: controller=0
enclosure=2

omreport Temperature Probe Status

Table 8-9. omreport Temperature Probe Commands

Required Command Levels (1, 2, 3) Optional name=value pairs	Use
and name=value pair
omreport storage enclosure	Displays property information
	for all enclosures attached to
	the system.
controller=id enclosure=	Displays the temperature probes
<ENCLOSUREID>	for the specified enclosure.
info=temps
where id is the controller number
and the enclosure number. For
example: controller=0 enclosure=2

140

Using the Storage Management Service