Dell Command Line Interface manual Second, Per second, 2800, and 2850 systems, Send

Table 4-3. omconfig chassis bmc (continued)

name=value pair 1	name=value pair 2	Description
config=
config=serial	baudrate=9600 19200 38400 57600	9600: Sets connection speed to 9600 bits per
	115200	second.
		19200:Sets connection speed to 19200 bits per
		second.
		38400: Sets connection speed to 38400 bits per
		second.
		57600: Sets connection speed to 57600 bits per
		second.
		115200: Sets connection speed to 115200 bits
		per second.
		NOTE: Baud rates of 9600, 19200, 38400, and
		57600 are supported on PowerEdge 1800,1850,
		2800, and 2850 systems.
		Baud rates of 9600, 19200, and 57600 are
		supported on PowerEdge x9xx systems.
		Baud rate of 115200 is supported on certain
		systems that have a DRAC 5 installed.
	flowcontrol=none rtscts	none: No control over the flow of
		communication through the serial port.
		rtscts: RTS is ready to send and CTS is clear to
		send.

64

omconfig: Managing Components Using the Instrumentation Service