Table 4-3. omconfig chassis bmc (continued)

name=value pair 1

name=value pair 2

Description

config=

 

 

config=user

id=user id

(continued)

dracusergroup=admin poweruser

 

 

guest testalert custom none

id=number lanaccesslevel= administrator operator user none

id=user id: User ID of the user being configured.

NOTE: Only RAC groups can be configured. The option dracusergroup is available only if DRAC 5 is present on the system.

dracusergroup=admin: Enables the Administrator User privileges.

dracusergroup=poweruser: Enables the Power User privileges.

dracusergroup=guest: Enables the Guest User privileges.

dracusergroup=testalert: Enables the Test Alert User privileges.

dracusergroup=custom: Enables the Custom User privileges.

NOTE: See Table 4-4 for more information on the name=value pair. dracusergroup=custom.

dracusergroup=none: Does not enable User privileges.

id=number: ID number of the user being configured.

lanaccesslevel=administrator: User with an ID has access privileges of an Administrator for the LAN channel.

lanaccesslevel=operator: User with an ID has access privileges of an Operator for the LAN channel.

lanaccesslevel=user: User with an ID has access privileges of a User for the LAN channel.

lanaccesslevel=none: User with an ID does not have access privileges for the LAN channel.

omconfig: Managing Components Using the Instrumentation Service

69

Page 69
Image 69
Dell Command Line Interface manual Config= Config=user Id=user id, Guest testalert custom none