FARGO electronic HDP5000 manual Using the Configuration Tab

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Configuration Tab

Using the Optional Printer Features Group Box

The Default setting is checked.

•If checked, upon Configuration tab activation, the Driver retrieves the installed Printer features information from the Firmware and automatically checks the appropriate check boxes for Dual Sided, Lamination and Magnetic Encoder.

•If checked, the Dual Sided, Laminator, and Magnetic Encoder checkboxes are read only.

•If checked and no Printer is found or bi-directional capabilities are disabled or unavailable, the error message (shown below) is displayed.

•If unchecked or cleared, feature check boxes become active and can be manually set.

•If the Driver is reinstalled, it resets to the default of checked.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-3