FARGO electronic HDP5000 manual Cloth, Clean the Printhead with a Printhead swab

RESTRICTED USE ONLY Fargo Electronics, Inc.

Section 12: Packing the Card Printer

The purpose of this section is to provide the User with a specific packing procedure for the HDP5000.

(Note: Do not install the Lamination Module to the Printer before shipping. The Lamination Module must be packaged in its own box and shipped separately, then installed at the site. Attaching both modules together before shipping may cause damage.)

Follow this instruction to pack the Card Printer for transport.

Step	Procedure
1	Clean the inside of the Printer with deionized air. Wipe it down with a lint-free
	cloth.
2	Clean the Printhead with a Printhead swab.
3	Pack the Printer in the original carton and packing materials.
4	Be sure to enclose any necessary paperwork, test cards, etc.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 12-1