FARGO electronic HDP5000 manual Reviewing the Lamination Module Sequence of Operations

RESTRICTED USE ONLY Fargo Electronics, Inc.

Reviewing the Lamination Module Sequence of Operations

The LAM sequence of operations begins after printing has occurred with the Card Printer.

Step	Process
1	The card is fed onto the Lamination Module.
2	The card is fed to the Card Position Sensor.
3	The Lamination Take-up Motor begins cycling until the Lamination Sensor
	detects the mark.
4	The Card Feed Motor activates to place the leading edge of the card on the Lam
	Roller.
5	The Lam Roller Lift Motor cycles until the Transfer Roller Lift Sensor detects the
	roller is down.
6	The Card Feed Motor and the Lamination Drive Motor activate for the length of
	the card.
7	The Lam Roller Lift Motor cycles until the Lam Roller Lift Sensor detects the
	roller is up.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-7