FARGO electronic HDP5000 manual Cancel

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
No Smart Encoder	You are trying to send	To cancel, click on Cancel
(PC Error Message	encoding data, but the	Print.
	Printer is not configured with
No. 33)
	this Encoder type.
Printing Error	An error was detected during	Reset the Printer and try
(PC Error Message	printing.	again.
No. 107)		If this problem persists, call for
		technical assistance.
Reboot Required	Unspecified system error	Reset the Printer and try
(PC Error Message	detected by the Printer	again.
	Firmware.	If this problem persists, call for
Nos. 9, 65, 67, and
163)		technical assistance.
Reinsert Ribbon	The Ribbon must be	Reinsert the Ribbon or press
(PC Error Message	reinserted for proper	Resume.
	functioning of the Printer.
No. 141)
Remove Card	A card is jammed in the Print	Clear the jam and press
(PC Error Message	Station or card flipping area	Cancel.
	of the Printer.
No. 68)
Remove Ribbon	The print Ribbon is not	Verify the correct Ribbon is
(PC Error Message	installed properly or has	installed in the Ribbon
	been damaged.	Cartridge.
No. 139)
		Remove it and replace it with
		the correct Ribbon.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-18