FARGO electronic HDP5000 manual Printer Components LCD and Softkey Control Pad

RESTRICTED USE ONLY Fargo Electronics, Inc.

Printer Components: LCD and Softkey Control Pad

The Printer provides a two line, thirty-two (32) character LCD Display that can communicate helpful information about the Printer's operation. The bottom line of the LCD Display will always be used to communicate the current function of the Printer's softkey buttons.

This section describes how the LCD Display and Softkey Control Pad work together.

Component	Description
Softkey	The Printer has two softkey buttons that appear below the LCD
Buttons	Display. Their current function is indicated by the words appearing
	above them. This function will change according to the Printer's current
	mode of operation.
	• Press the corresponding softkey button under the choice you want
	to select. If no word appears above a particular button, this
	indicates it has no function in that particular mode of operation.
LCD Display	The Printer's LCD Display will change according to the Printer's current
	mode of operation.
Ready /	Once the Printer has finished its system check and with the Printer
Printer Open	closed, the Printer will display Printer Ready to indicate that the Printer
Screens	is ready for operation. (Note: The Printer will stay in this mode until it
	receives a print job or it is turned OFF.)
	• If the Printer is opened, the Cover is Open screen will appear.
	Press either the Forward or Back buttons to move the Printer's
	card path Rollers in the indicated direction. (Note: This is helpful
	when cleaning the Printer or if clearing jammed media.)
	• All rollers will move even if the Lam cover is not opened.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-18