FARGO electronic manual Time Requirement, System Requirements, Inspection HDP5000

RESTRICTED USE ONLY Fargo Electronics, Inc.

Introduction

The following guide will walk you through the installation of the Fargo HDP5000 Driver.

Time Requirement

This software installation process will require approximately 2 to 6 minutes (depending on the speed of your PC).

System Requirements

The System Requirements are as follows:

•IBM-PC or compatible, Windows® 32 bit 2K/XP, Pentium® class 500 MHz computer with 256MB of RAM or higher, 500MB free hard disk space or higher, USB 1.1

Inspection – HDP5000

While unpacking your Printer, inspect the carton to ensure that no damage has occurred during shipping. Make sure that all supplied accessories are included with your unit.

Unpacking the Printer

The following items are included with your Printer:

•Software Installation CD (includes Printer Driver, Online User’s Guide and Printer Diagnostic Tool)

•Power Supply with Power Cord (Note: This product is intended to be supplied by a Listed Power Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)

•Card Cleaning Roller

•Card Cartridge

•Card Output Bin

•Warranty Card

•Registration Card

This is included with the HDP5000-LC Only:

•Card Lamination Module - Power Supply with Power Cord

(Important: Please use the original packaging when shipping the HDP5000 Printer/Flipper/Laminator. This will require the Laminator Module to be detached from the Printer or Flipper prior to shipping.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-2