FARGO electronic HDP5000 Using the Click and Drag capability, Selecting inches or mm radio button

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Click and Drag capability

Click and drag the corners and the sides of an area to change size and location of area.

•The Horizontal, Vertical size and X, Y coordinates update accordingly. Click and drag the area to change the location.

•The X, Y coordinates update accordingly.

Selecting “inches or mm” radio button

Select from the inches or mm radio button to change the measurement type. (Note: This is similar to the choice on the Card tab.)

•The inches radio button displays the area size and the location in inches.

•The mm radio button displays the area size and the location in mm.

Using the Add and Delete buttons

Step Procedure

1Use the Add button for these capabilities:

•Add an area default sized to .2 (.2 at location “0” with focus on the added area).

•Add multiple areas in the same location with the same affect (as if there were only one area). (Note: Intersecting/overlapping areas do not cancel each other out; instead, they act as one area.)

2Using the Delete button to delete the area with focus from the graphic.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-91