FARGO electronic HDP5000 manual Using the Print Path, Step

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Print Path page

The purpose of the Print Path page is to allow the User to view or change the TCP port numbers used to communicate to the printer.

•If these settings are left to the default entry of 0 then the default ports of 9100, 5400 and 5402 will be used for the RawSocket TCP Port, the CPS Data TCP Port and the CPS Command TCP Port respectively.

•The CPS Command TCP Port is dependent on the setting of the CPS Data TCP Port and always two units higher.

Step Procedure

1Select the Print Path link.

2View the active configuration of the printer in the Current Settings area on this page.

3New port numbers may be entered into the Stored Settings area in the text boxes provided on this page.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-45