RESTRICTED USE ONLYFargo Electronics, Inc.

Changing to the Static IP Address Mode

Step

Procedure

 

 

1

Select the Network link from any web page of the Printer.

 

 

2

Select the Use the following IP address radio button, which prepares the

 

Printer to use network settings (that the User has manually set).

 

These manual settings will then be used the next time the Printer is rebooted.

 

 

3

Enter the network settings which are required for Ethernet communications

 

from within the same subnet.

 

With only these entries the User will be unable to print from a subnet other

 

than the subnet on which the Printer is connected. These required settings

 

are the following:

 

IP Address

 

Subnet Mask

 

 

4

Enter the optional network settings for Ethernet communications across a

 

router from other subnets, as follows:

 

Default Gateway

 

 

5

Enter the optional network settings for DNS. These are the following:

 

DNS Server Address

 

DNS Domain Suffix

 

 

6

Select the Submit button to save these changes to stored settings in the

 

memory of the Printer. (Note: These settings will not be lost if the power is

 

removed from the Printer.)

 

 

 

 

 

Continued on the next page

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2)

6-20

Page 148
Image 148
FARGO electronic HDP5000 manual Changing to the Static IP Address Mode