FARGO electronic HDP5000 manual Setting Up the Printer Driver, Setting up Windows 2000/XP/2003

RESTRICTED USE ONLY Fargo Electronics, Inc.

Setting Up the Printer Driver

Once the appropriate Printer Driver for the computer has been installed, you will need to set the Driver up with the proper print options. To open the Printer Driver setup window, please refer to the following steps for the specific operating system:

Setting up Windows 2000/XP/2003

Step	Procedure
1	Click the Start button, point to Settings and select Printers.
2	Click on the HDP5000 icon with the right mouse button.
	Select Printing Preferences... if using Windows 2000/XP/2003.
	• If you would like to permanently save the Printer Driver settings so you will
	not need to change them again, do so through the main Printer Driver
	setup window described above.
	• Although most applications do allow you to change these same Printer
	Driver options from their own Print screens, the settings may not be
	permanently saved.
3	To change or verify the appropriate Printer Driver options for the print job,
	please refer to the topics describing each of the Printer Driver's tabs.

Using the OK, Cancel and Help buttons

Here are the descriptions:

•OK button: Closes dialog box and saves Driver configuration changes that have occurred since Driver dialog box has been opened.

•Cancel button: Closes dialog box and cancels Driver configuration changes that have occurred since Driver dialog box has been opened.

•Help button: Launches Help indexed to help for the corresponding active tab.

•Apply button: Not active for the user.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-10