FARGO electronic manual 16MB RAM, HDP5000/HDP5000-LC

RESTRICTED USE ONLYFargo Electronics, Inc.

Technical Specifications (continued)

Term	Description
Memory	16MB RAM
Operating	65º F to 90º F (18º C to 32º C).
Temperature
Options	• Card Lamination Module – single-sided or double sided
	• Magnetic stripe encoding dual-sided (simultaneous)
	• 300-card input hopper (available soon)
	• Smart card encoding (contact/contactless)
	• Dual-sided printing
	• Door and cartridge locks
	• Printer cleaning kit

Output Hopper	HDP5000/HDP5000-LC
Card Capacity	•	200 cards (.030mm)
Overlaminate	All overlaminates are available in either clear, holographic globe
Options	design or custom holographic design. They can also be optimized
(HDP5000-LC	for use with smart cards and Magnetic Stripes.
and HDP5000	Here are the options:
only)
	• Thermal Transfer Overlaminate, .25 mil thick, 500 prints
	• PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints
		(PolyGuard available in a CR-80 patch size)
Power Supply	•	80W for HDP5000
	• 160W (two 80W bricks) for the HDP5000-LC
	(Note: This product is intended to be supplied by a Listed Power
	Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)
Print Area	Over-the-edge on CR-80 cards.
Printing Method	HDP™ Dye-Sublimation / Resin Thermal Transfer

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-12