FARGO electronic manual Print Ribbon, HDP5000 and HDP5000-LC prints or images

RESTRICTED USE ONLYFargo Electronics, Inc.

Technical Specifications (continued)

Term	Description
Print Ribbon	HDP5000 and HDP5000-LC (prints or images):
Options	• Full color, YMC*, 750 prints
	• Full color with resin black, YMCK*, 500 prints
	• Full color with two resin black Panels, YMCKK*, 500 prints
	• Full color YMC with resin black and heat seal panel for difficult-
	to-print surfaces, YMCKH*, 500 prints
	*Indicates the Ribbon type and the number of Ribbon panels printed
	where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black and H=Heat
	Seal.

Print Speed-	HDP5000 and HDP5000-LC (see note below):
Batch Mode	• 38 seconds per card / 95 cards per hour (YMC with transfer)*
	• 46 seconds per card / 78 cards per hour (YMCK with transfer)*
	• 70 seconds per card / 51 cards per hour (YMCKK with
	transfer)*
	• 50 seconds per card / 72 cards per hour (YMCK with transfer
	and dual-sided, simultaneous lamination)*
	• 75 seconds per card / 48 cards per hour (YMCKK with transfer
	and dual-sided, simultaneous lamination)*
	Print speed indicates an approximate print speed and is measured
	from the time a card feeds into the Printer to the time it ejects from
	the Printer.
	• Print speeds do not include encoding time or the time needed
	for the PC to process the image.
	• Process time is dependent on the size of the file, the CPU,
	amount of RAM and the amount of available resources at the
	time of the print.
Resolution	300 dpi (11.8 dots/mm)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-13