FARGO electronic HDP5000 manual Selecting the Appropriate HDP Printer Driver settings

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Appropriate HDP Printer Driver settings

You have these card selections (to choose from):

•Fargo UltraCard III (Default Card Type)

•Fargo Ultracard

•HID ISO Prox – Standard (13xx)

•HID ISO Prox – Composite (15xx)

•HID Identity – Standard (IDx20A)

•HID Identity – Composite (HTx20E)

•HID iCLASS – Standard (20xx)

•HID iCLASS – Composite (21xx)

•HID FlexSmart –Standard 14x0)

•HID FlexSmart –Composite (14x6)

•HID FlexSmart Prox – Std (14x1)

•HID FlexSmart Prox – Comp (14x7)

•Indala FlexISO – Standard (FPISO)

•Indala FLexISO XT-Composite (FPIXT)

•Custom 1

•Custom 2

In addition, you have these selections (to choose from):

•Defaults: The HDP Printer Driver software has default Transfer Temperature and Dwell Time settings that deliver the best transfer for these card types. These defaults automatically configure based on the card type, Ribbon type and whether printing single- or dual-sided.

•Card Type Selection: Before printing, if using these standard Fargo card types, check to make sure that the appropriate card type option selected from the Card tab of the HDP Printer Driver:

•Proper Settings: It is very important to note that not all card types will be accommodated by these default settings. In some cases, experimentation may be needed to find the proper settings.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-3