FARGO electronic HDP5000 manual Troubleshooting with the LCD Error Message Table

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
Remove Lam Mtl	Single Sided Lam job	Remove either Lamination
(PC Error Message	specified but the material is	Cartridge.
	loaded in both Modules.
No. 210)
Remove Lam1 Mtl	Single sided lamination on	Remove Cartridge 1.
(PC Error Message	the back side is specified but
	material is loaded in the Lam
No. 204)
	1 Module.
Remove Lam2 Mtl	Single sided lamination on	Remove Cartridge 2.
(PC Error Message	the front side is specified but
	material is loaded in the Lam
No. 205)
	2 Module.
Ribbon Break/Jam	The Ribbon is not able to	If jammed, clear the jam. If
(PC Error Message	find the next panel correctly.	broken, repair by taping the
	Check for jams/breaks.	Ribbon back on to the take-up
No. 99, 108, and
		core.
109)
		Press Resume to continue or
		Cancel to abort.
Ribbon Low	The print Ribbon will soon	If printing a large number of
(PC Error Message	run out.	cards, replace the Ribbon now
		or monitor the Printer until the
No. 92)
		Ribbon is gone and install a
		new Ribbon.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-19