FARGO electronic HDP5000 manual Measuring the Total Card area

RESTRICTED USE ONLY Fargo Electronics, Inc.

Measuring the Total Card area

Step Procedure

1Determine the area of the card to define. (Note: This area is indicated by the dashed outline, as shown below. The easiest way to determine the size of this area is to actually print a card and look at it in the same orientation as when it exits the Printer.)

2Measure the total area and enter those dimensions into the dimension boxes. (Note: The minimum size an area can be is .2 x .2 (5mm x 5mm).)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-96