FARGO electronic HDP5000 manual Step Procedure

RESTRICTED USE ONLY Fargo Electronics, Inc.

Upgrading the Main Firmware with the Fargo Workbench Printer Utility

The Main Printer Firmware upgrades are done with the same procedure as the USB- connected Printer.

•The PC doing the upgrade must have a Driver installed for the Fargo Printer to be upgraded.

•Alternatively, a HDP5000 User can upgrade the HDP5000 Main Printer Firmware by using the HDP5000 Upgrade web page.

Step Procedure

1Run the Fargo Workbench Printer Utility by selecting from the start menu the following:

Start -> Programs -> Fargo -> Fargo Workbench Printer Utility -> Fargo Workbench

2Select the Fargo Printer to upgrade from the Actions Menu, as shown below.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-48