FARGO electronic HDP5000 manual Loading the Overlaminate

RESTRICTED USE ONLY Fargo Electronics, Inc.

Loading the Overlaminate

(Note: This procedure only applies to the HDP5000-LC.)

The loading process for both the Thermal Transfer Overlaminate and the PolyGuard™ Overlaminate material is the same. Refer to the following steps to load either type of overlaminate into the Printer.

Step Procedure

1Remove the overlaminate from its packaging.

2Load the Lamination Rolls into the Cartridges until they click.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-15