FARGO electronic HDP5000 manual Initiating a Telnet Session, Interface Description

RESTRICTED USE ONLY Fargo Electronics, Inc.

Network Management Interface

The SNMP interface is described below.

Interface	Description
SNMP	•	The Ethernet interface is a fully-manageable SNMP agent that supports
		MIB-II.
	•	The Ethernet interface is MIB II compliant, allowing SNMP managers to
		monitor protocol, network and routing statistics.

Telnet Command Line Interface

Initiating a Telnet Session

This procedure shows how to initiate a Telnet session from a PC in order to access the Telnet services provided by the Printer.

	Description
Initiating a	Follow these instructions to issue Telnet commands.
Telnet	1. Identify the IP address of your Printer. (Note: See Switching to the
session
	Automatic IP Address Mode.)
	2. Initiate a Telnet session from a DOS window on your PC. At the DOS
	prompt, enter telnet [IP Address]
	• Example: C:\>telnet 192.168.11.12
	• All Telnet responses from the Printer will then be displayed in the
	Telnet session on the PC.
	• All commands entered will be sent to the Telnet client in the
	Printer.
	3. Enter “help” or “?” to get an on-window list of supported Telnet
	commands.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-5