FARGO electronic HDP5000 manual Reviewing the Telnet Command Table

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing the Telnet Command Table (continued)

Telnet Command			Command Purpose	Command Format
store	net	addr	Store a new IP	store net addr <ADDRESS>
			address.
		mask	Store a new address	store net mask <MASK>
			mask.
		gateway	Store a new default	store net gateway <ADDRESS>
			gateway.
		dns	Store a new DNS	store net dns <ADDRESS>
			server address.
		domain	Store a new DNS	store net domain <STRING>
			domain suffix.
		opts	Enable or disable	To enable automatic address
			automatic address	assignment:
			assignment using	store net opts dhcp
			DHCP. Static (non-
				To disable automatic address
			automatic) addresses
			will come from the	assignment:
			stored or default	store net opts -dhcp
			settings, depending on
			the other settings.
		from	Restore the network	store net from defaultcurrent
			settings from either the
			default settings or the
			current settings.
	ifc	mode	Specify the Ethernet	store ifc mode
			interface mode as:	auto10half10full100half100full
			automatic, full or half
			duplex; 10 or 100 mHz.
			(NOTE: 100 mHz. is
			not supported by the
			HDP5000).
		from	Set the Ethernet mode	store ifc from defaultcurrent
			settings from the
			default or current
			settings.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-11