FARGO electronic HDP5000 manual Selecting the Calibrate Laminator tab, Calibrate Passed

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Calibrate Laminator tab

The Calibrate Laminator tab is active when the Laminator is automatically detected or when the Laminator is manually checked (as a Printer Feature on the Configuration tab). If the Laminator is not detected and not manually checked, the tab is active; however, all functions are grayed out.

•Calibrate button: Sends calibrate Laminator command to Printer. Follow the instruction on the page for setting up the Printer.

•Help button: Launches help specific to this tab.

Step Procedure

1Select the Calibrate Laminator tab.

a.Ensure that the Cartridges are out of the Laminator.

b.Ensure the Laminator Cover is closed.

c.Click on the Calibrate button. (Note: The Printer’s LCD will display

CALIBRATE PASSED.)

d.Click on the OK button on the LCD display to complete the procedure.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-7