Manuals / Runco / Computer Equipment / Computer Monitor

Runco CW-42i manual » INSTALL 2 Menu Setting the Auto Off for computer images, Install

Models: CW-42i

1 70

Download 70 pages 841 b

Page 40

» INSTALL 2 Menu

OSD (On Screen Display) Controls

» INSTALL 2 Menu

Setting the Auto Off for computer images

This energy-saving (Auto Off) function automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time.

Example: Turning the Auto Off function on

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “INSTALL 2”, then press the MENU button. The “INSTALL 2” menu appears.

2.Use the and buttons to select “AUTO OFF”.

3.To turn the Auto Off function on ...

Use the	and buttons to select “ON”. The mode switches as follows each time the or button is pressed:
ON	OFF
ON	OFF		INSTALL 2					2 / 3
			INSTALL 2					2 / 3
			PREVIOUS PG

			AUTO OFF			:	OFFf
			CINEMA MODE			:	ON
			PDP PROTECT			:	OFF
			SIDEBAR ADJ			:	3
			S1 / S2			:	OFF
			AUTO SIZE			:	ON
			DVI TYPE
			NEXT PAGE
			SEL.	ADJ.			EXIT RETURN

4.Once the setting is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

■ AUTO OFF function

* The auto off function automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer.

* If the computer’s power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state.

* For instructions on using the computer’s Auto Off function, refer to the computer’s operating instructions.

■ AUTO OFF settings		In this mode the Auto Off function is turned off.
ON	In this mode the Auto Off function is turned on. OFF

■ AUTO OFF function and POWER / STANDBY indicator

The POWER/STANDBY indicator indicates the status of the Auto Off function. See page 39 for indicator status and description.

■ Restoring the factory default settings

Select “FACTORY” under the INSTALL 1 menu.

Note that this also restores other settings to the factory defaults.

38

Image 40

Runco CW-42i manual » INSTALL 2 Menu Setting the Auto Off for computer images, To turn the Auto Off function on, Install

Contents

CW-42i OWNER’S OPERATING MANUALFlat Panel Plasma Display Monitor withPage TABLE OF CONTENTS Limited WarrantyHow to Attach Options to the Plasma Monitor Installation» The features you’ll enjoy include Contents of the packageINTRODUCTION Options» Warnings and Safety Precautions » PrecautionsIMPORTANT INFORMATION » Plasma monitor cleaning procedure NOTE BURN-INS ARE NOT COVERED BY THE WARRANTY» To avoid damage and prolong operating life Recommendations to avoid or minimize phosphor burn-inLIMITED WARRANTY WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTYWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY TO AVOID IMAGE BURN-INEFFECTIVE WARRANTY DATE IMPORTANT WARRANTY REGISTRATIONCONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE RIGHTS, LIMITS AND EXCLUSIONSHOW TO ATTACH OPTIONS TO THE PLASMA MONITOR Ventilation Requirements for enclosure mounting» Front View 1 POWER 2 REMOTE SENSOR WINDOW Receives the signals from the remote control3 POWER 6 VOLUME DOWN and UPA AC IN C VIDEO 1,2,3 BNC, RCA, S-VideoD AUDIO1, AUDIO2, AUDIO3 E DVD1 / HD1» Plasma Remote Control 1 ON/OFF VOLUME +2 MENU 3 CURSOROVERALL FUNCTIONAL DESCRIPTION DIGITAL INPUTS DVD 1 / HD1» Plasma Connection Examples INSTALLATIONVCR or Laser Disc Player » Connecting Your VCR or Laser Disc Player » Connecting Your PC or Macintosh Computer» Connecting Your DVD Player » Pin Conﬁguration of the RGB3 Connector DVI Connector » Pin Assignments for 15-pin RGB analogInstallation Pin No» POWER To turn the unit ON and OFF » VOLUME To adjust the sound volume» MUTE To cancel the sound » DISPLAY To check the settingsWhen viewing videos or DVDs ASPECT RATIO CONTROLS» Aspect Ratio Operations Manual LTR BOX mode» Wide Screen Operation with Computer Signals 2. Within 3 secondsSTD 43 mode 43 or SXGA ANAMPHC modeOSD ON SCREEN DISPLAY CONTROLS » Menu OperationsDefault ResetADJUST DefaultDefault ResetINSTALL INSTALL» PICTURE ADJUST Menu Adjusting the picture If “CAN NOT ADJUST” appearsSetting the picture mode according to the brightness of the room 4. Once the adjustment is completed3. To set to “CUSTOM1” Types of picture modes4. Once the setting is completed Reducing noise in the pictureVIDEO NR Types of noise reductionSetting the KELVIN 4. Once the setting is completed5400K RedderAdjusting the Color to the Desired Level 7. Once the adjustment is completedPerform the following operations Perform Steps 1-3 of KELVIN, thenMaking the DITHER Adjustments Changing the GAMMA4. Once the setting is completed 4. Once the setting is completedAdjusting the Colors 5. Once the setting is completedPerform the following operations SEL. ADJ. EXIT RETURNTo continue adjusting the audio ... Repeat from step » AUDIO MenuAudio setup menu Restoring the factory default settingsSetting the allocation of the audio connectors 3. To set the AUDIO INPUT1 to “VIDEO1”4. Once the adjustment is completed OSD On Screen Display Controls2. To adjust the vertical position To continue making other computer image adjustments4. Once all adjustments are completed » IMAGE OPTIONS MenuWhen “COMPUTER” is off Adjusting the COMPUTERAdjusting the position of the image Restoring the factory defaults settings4. To set the DISPLAY OSD to “OFF” » INSTALL 1 Menu Setting the on-screen menu5. Once the setting is completed Setting the BNC connectors 3. To set the BNC INPUT mode to “COMP”4. Once the setting is completed INSTALLChecking the signal being transmitted to RGB1 terminal Setting a computer image to the correct RGB select screen3. To set the RGB select mode to “AUTO” 4. Once the setting is completedSetting high deﬁnition images to the suitable screen size 3. To set the HD TYPE mode to “1080B”4. Once the setting is completed Restoring the factory default settingsSetting the Input Skip 3. To set the INPUT SKIP mode to “OFF”4. Once the setting is completed INSTALL4. Once the setting is completed Resetting to the default valuesFACTORY » INSTALL 2 Menu Setting the Auto Off for computer images 3. To turn the Auto Off function on4. Once the setting is completed INSTALLPOWER / STANDBY indicator Setting the picture to suit the movie4. Once the setting is completed OSD On Screen Display Controls4. Once the setting is completed LUM. SETTING Luminance SettingLUM. SETTING OSD On Screen Display ControlsAdjust the ORBITER function manually ORBITERORBITER settings ORBITER FUNCTION settingsSetting the time for INVERSE 6. Once the setting is completedINVERSE Perform Steps 1-2 of PDP PROTECT, thenSetting the time for IMAGE SWEEP Set a time duration and the speed IMAGE SWEEPPerform Steps 1-3 of IMAGE SWEEP, then 6. Once the setting is completed3. To adjust the “SIDEBAR ADJ” Setting the SIDEBAR ADJ. for the sides of the screenSOFTEN Setting the screen size for S1/S2 video input Setting the signal and black level for DVI signal3.To set PLUG/PLAY mode to “STB/DVD” 4. Once the setting is completed» INSTALL 3 Menu Using the timer Perform Steps 1-2 of TIMER, thenPRESENT TIME Perform the following operationsPROGRAM TIMER 5. Once the setting is completedPerform Steps 1-2 of TIMER, then PRESENT TIME settingsSetting the DEFAULT INPUT 4. Once the setting is completedPROGRAM TIMER settings To reset the programEnabling/disabling the front panel controls To set the CONTROL LOCK to “ON”4. Once the setting is completed CONTROL LOCK settingsEnabling/disabling remote control wireless transmission To set the IR ENABLE to “OFF”Loop Out Setting the screen, thenID Number Setting To set the ID number for the remote control3. To set the ID NUMBER to “O2” Perform the following operationsVideo Wall Setting 4. Once the setting is completedPerform the following operations VIDEO WALLDIVIDER Perform Steps 1-2 of VIDEO WALL, thenPOSITION DIVIDER settingsAUTO ID DISP. MODEPerform Steps 1-2 of VIDEO WALL, then IMAGE ADJUST P. ON DELAY Power on delay6. Once the setting is completed P. ON DELAY settingsLUM SET LINK LUM SET LINK settingsPerform Steps 1-2 of VIDEO WALL, then OSD On Screen Display ControlsREPEAT TIME REPEAT 6. Once the setting is completedPerform Steps 1-2 of VIDEO WALL, then REPEAT TIME3. Once the setting is completed » LANGUAGE Menu Setting the language for the menus2. To select “DEUTSCH” 2. To select “3.58NTSC” » COLOR SYSTEM Menu Setting the video signal format3. Once the setting is completed » SIGNAL INFO. Menu Checking the frequencies, polarities of input signals, and resolution3. Once you have checked the frequency SIGNAL INFOTABLE OF SIGNALS SUPPORTED Computer input signals supported by this systemIf you are connecting a composite sync signal, use the HD terminal With digital input some signals are not accepted7 Other screen modes LTR BOX and VRTWIDE are available as well TROUBLESHOOTING SYMPTOMCHECKS REMEDYDIMENSIONS 3.87541.250 42 diagonalSPECIFICATIONS Native ResolutionPower Requirements Power ConsumptionPage Page Runco International 2900 Faber Street Union City, CA RUMA-010400 01-17-06Ph 510 324-7777 / Fax 510 1-800-23RUNCO