Runco CW-42i manual Divider, Perform Steps 1-2 of VIDEO WALL, then, Position, DIVIDER settings

OSD (On Screen Display) Controls

DIVIDER

Set the 2x2 or 3x3 video wall.

Example: Setting “4”

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the and buttons to select “DIVIDER”.

4.Use the and buttons to select “4”.

The mode switches as follows each time the or button is pressed:

OFF 1 4 9

VIDEO WALL

DIVIDER		:	OFF
POSITION
DISP. MODE		:	SPLIT
AUTO ID
IMAGE OPT
P. ON DELAY		:	OFF
LUM SET LINK		:	OFF
REPEAT TIME		:	OFF
SEL.	ADJ.		EXIT RETURN

Information
■ DIVIDER settings
OFF, 1	1	Screen (Matrix display function does not work)
4	4	Screens (2x2 video wall)
9	9	Screens (3x3 video wall)

* When you select “4” or “9”, set the VIDEO WALL POSITION.

POSITION

Set the position of each display.

Example: Setting “4”

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the and buttons to select “POSITION”, then press the MENU button. The “VIDEO WALL POSITION” screen appears.

4.Use the and buttons to select “NO. 4”.

The mode switches as follows each time the or						button is pressed:
• 4 Screens
	NO. 1	NO. 2		NO. 3	NO. 4
							Information
• 9 Screens
							■ VIDEO WALL POSITION settings
	NO. 7	NO. 8			NO. 14 NO. 15		1 Screen ..... There is no need to set POSITION.
							4 Screens
			VIDEO WALL POSITION					NO. 1	NO. 2
								NO. 4	NO. 3
			POSITION NO. :		4
							9 Screens
								NO. 7	NO. 8		NO. 9
								NO. 10	NO. 11	NO. 12
			SEL.	ADJ.	EXIT RETURN			NO. 13	NO. 14	NO. 15

5. Press the EXIT button to return to the VIDEO WALL screen.

53