Runco CW-42i manual » IMAGE OPTIONS Menu, To select a mode, STD 43 ↔ ANAMPHC ↔ VRTWIDE ↔ LTR BOX

OSD (On Screen Display) Controls

» IMAGE OPTIONS Menu

The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “IMAGE OPTIONS”, then press the MENU button. The “IMAGE OPTIONS” screen appears.

Default settings (when RGB/PC is selected).

IMAGE OPTIONS

ASPECT RATIO		:	VRTWIDE
V SHIFT				0
H SHIFT				0
V-SIZE				0
H-SIZE				0
COMPUTER		: OFF
FINE PICTURE				0
PICTURE ADJ				0
SEL.	ADJ.		EXIT RETURN

* The settings on the IMAGE OPTIONS menu are not preset at the factory.

To select a mode ...

Use the and buttons to select a mode. The mode switches as follows when the and buttons are pressed:

STD 4:3 ↔ ANAMPHC ↔ VRTWIDE ↔ LTR BOX

* The mode can also be switched by pressing the “ASPECT” button on the remote control.

2.To adjust the vertical position ...

Use the and buttons to select “V SHIFT”.

	IMAGE OPTIONS
ASPECT RATIO :			VRTWIDE
V SHIFT			0
H SHIFT			0
V-SIZE			0
H-SIZE			0
SEL.		ADJ.	EXIT RETURN
3. Adjust using the	and	buttons.

V SHIFT

0

*If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

To continue making other computer image adjustments...

Repeat from step 2.

4.Once all adjustments are completed...

Press the EXIT button to return to the main menu, To delete the main menu, press the EXIT button once more.

30