Manuals / Runco / Computer Equipment / Computer Monitor

Runco CW-42i manual OSD On Screen Display Controls, POWER / STANDBY indicator

Models: CW-42i

1 70

Download 70 pages 841 b

Page 41

POWER / STANDBY indicator

OSD (On Screen Display) Controls

POWER / STANDBY indicator

AUTO	POWER /	AUTO OFF	Description	Turning the picture
OFF	STANDBY	operating		back on
mode	indicator	status

On	Green	Not	Horizontal and	Picture already on.
		activated.	vertical synchronizing
			signals are present
			from the computer.

Off	Red	Activated.	Horizontal and/or	Operate the keyboard
			vertical synchronizing	or mouse. The
			signals are not sent	picture reappears.
			from the computer.

Setting the picture to suit the movie

The ﬁlm image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]

Example: Setting the “CINEMA MODE” to “OFF”

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “INSTALL 2”, then press the MENU button. The “INSTALL 2” menu appears.

2.Use the and buttons to select “CINEMA MODE”.

3.To set the CINEMA MODE to “OFF”...

Use the and buttons to select “OFF”. The mode switches as follows each time the or button is pressed:

ONOFF

INSTALL 2

2 / 3

PREVIOUS PG

AUTO OFF

CINEMA MODE

PDP PROTECT SIDEBAR ADJ S1 / S2

AUTO SIZE

DVI TYPE

NEXT PAGE

:OFFf

: ON

:OFF

:3

:OFF

:ON

SEL. ADJ. EXIT RETURN

Information

■ CINEMA MODE

ON ......... Automatic discrimination of the image and projection

in cinema mode.

OFF ....... Cinema mode does not function.

■ Restoring the factory default settings

Select “FACTORY” under the INSTALL 1 menu.

Note that this also restores other settings to the factory defaults.

4.Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

39

Image 41

Runco CW-42i manual OSD On Screen Display Controls, POWER / STANDBY indicator, Setting the picture to suit the movie

Contents

OWNER’S OPERATING MANUAL CW-42iFlat Panel Plasma Display Monitor withPage Limited Warranty TABLE OF CONTENTSHow to Attach Options to the Plasma Monitor InstallationContents of the package » The features you’ll enjoy includeINTRODUCTION OptionsIMPORTANT INFORMATION » Precautions» Warnings and Safety Precautions NOTE BURN-INS ARE NOT COVERED BY THE WARRANTY » Plasma monitor cleaning procedure» To avoid damage and prolong operating life Recommendations to avoid or minimize phosphor burn-inWHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY LIMITED WARRANTYWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY TO AVOID IMAGE BURN-INIMPORTANT WARRANTY REGISTRATION EFFECTIVE WARRANTY DATECONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE RIGHTS, LIMITS AND EXCLUSIONSVentilation Requirements for enclosure mounting HOW TO ATTACH OPTIONS TO THE PLASMA MONITOR2 REMOTE SENSOR WINDOW Receives the signals from the remote control » Front View 1 POWER3 POWER 6 VOLUME DOWN and UPC VIDEO 1,2,3 BNC, RCA, S-Video A AC IND AUDIO1, AUDIO2, AUDIO3 E DVD1 / HD1VOLUME + » Plasma Remote Control 1 ON/OFF2 MENU 3 CURSORDIGITAL INPUTS DVD 1 / HD1 OVERALL FUNCTIONAL DESCRIPTIONVCR or Laser Disc Player INSTALLATION» Plasma Connection Examples » Connecting Your DVD Player » Connecting Your PC or Macintosh Computer» Connecting Your VCR or Laser Disc Player » Pin Assignments for 15-pin RGB analog » Pin Conﬁguration of the RGB3 Connector DVI ConnectorInstallation Pin No» VOLUME To adjust the sound volume » POWER To turn the unit ON and OFF» MUTE To cancel the sound » DISPLAY To check the settingsASPECT RATIO CONTROLS When viewing videos or DVDs» Aspect Ratio Operations Manual LTR BOX mode2. Within 3 seconds » Wide Screen Operation with Computer SignalsSTD 43 mode 43 or SXGA ANAMPHC mode» Menu Operations OSD ON SCREEN DISPLAY CONTROLSReset DefaultADJUST DefaultReset DefaultINSTALL INSTALLIf “CAN NOT ADJUST” appears » PICTURE ADJUST Menu Adjusting the picture4. Once the adjustment is completed Setting the picture mode according to the brightness of the room3. To set to “CUSTOM1” Types of picture modesReducing noise in the picture 4. Once the setting is completedVIDEO NR Types of noise reduction4. Once the setting is completed Setting the KELVIN5400K Redder7. Once the adjustment is completed Adjusting the Color to the Desired LevelPerform the following operations Perform Steps 1-3 of KELVIN, thenChanging the GAMMA Making the DITHER Adjustments4. Once the setting is completed 4. Once the setting is completed5. Once the setting is completed Adjusting the ColorsPerform the following operations SEL. ADJ. EXIT RETURN» AUDIO Menu To continue adjusting the audio ... Repeat from stepAudio setup menu Restoring the factory default settings3. To set the AUDIO INPUT1 to “VIDEO1” Setting the allocation of the audio connectors4. Once the adjustment is completed OSD On Screen Display ControlsTo continue making other computer image adjustments 2. To adjust the vertical position4. Once all adjustments are completed » IMAGE OPTIONS MenuAdjusting the COMPUTER When “COMPUTER” is offAdjusting the position of the image Restoring the factory defaults settings5. Once the setting is completed » INSTALL 1 Menu Setting the on-screen menu4. To set the DISPLAY OSD to “OFF” 3. To set the BNC INPUT mode to “COMP” Setting the BNC connectors4. Once the setting is completed INSTALLSetting a computer image to the correct RGB select screen Checking the signal being transmitted to RGB1 terminal3. To set the RGB select mode to “AUTO” 4. Once the setting is completed3. To set the HD TYPE mode to “1080B” Setting high deﬁnition images to the suitable screen size4. Once the setting is completed Restoring the factory default settings3. To set the INPUT SKIP mode to “OFF” Setting the Input Skip4. Once the setting is completed INSTALLFACTORY Resetting to the default values4. Once the setting is completed 3. To turn the Auto Off function on » INSTALL 2 Menu Setting the Auto Off for computer images4. Once the setting is completed INSTALLSetting the picture to suit the movie POWER / STANDBY indicator4. Once the setting is completed OSD On Screen Display ControlsLUM. SETTING Luminance Setting 4. Once the setting is completedLUM. SETTING OSD On Screen Display ControlsORBITER Adjust the ORBITER function manuallyORBITER settings ORBITER FUNCTION settings6. Once the setting is completed Setting the time for INVERSEINVERSE Perform Steps 1-2 of PDP PROTECT, thenIMAGE SWEEP Setting the time for IMAGE SWEEP Set a time duration and the speedPerform Steps 1-3 of IMAGE SWEEP, then 6. Once the setting is completedSOFTEN Setting the SIDEBAR ADJ. for the sides of the screen3. To adjust the “SIDEBAR ADJ” Setting the signal and black level for DVI signal Setting the screen size for S1/S2 video input3.To set PLUG/PLAY mode to “STB/DVD” 4. Once the setting is completedPerform Steps 1-2 of TIMER, then » INSTALL 3 Menu Using the timerPRESENT TIME Perform the following operations5. Once the setting is completed PROGRAM TIMERPerform Steps 1-2 of TIMER, then PRESENT TIME settings4. Once the setting is completed Setting the DEFAULT INPUTPROGRAM TIMER settings To reset the programTo set the CONTROL LOCK to “ON” Enabling/disabling the front panel controls4. Once the setting is completed CONTROL LOCK settingsTo set the IR ENABLE to “OFF” Enabling/disabling remote control wireless transmissionLoop Out Setting the screen, thenTo set the ID number for the remote control ID Number Setting3. To set the ID NUMBER to “O2” Perform the following operations4. Once the setting is completed Video Wall SettingPerform the following operations VIDEO WALLPerform Steps 1-2 of VIDEO WALL, then DIVIDERPOSITION DIVIDER settingsPerform Steps 1-2 of VIDEO WALL, then DISP. MODEAUTO ID P. ON DELAY Power on delay IMAGE ADJUST6. Once the setting is completed P. ON DELAY settingsLUM SET LINK settings LUM SET LINKPerform Steps 1-2 of VIDEO WALL, then OSD On Screen Display Controls6. Once the setting is completed REPEAT TIME REPEATPerform Steps 1-2 of VIDEO WALL, then REPEAT TIME2. To select “DEUTSCH” » LANGUAGE Menu Setting the language for the menus3. Once the setting is completed 3. Once the setting is completed » COLOR SYSTEM Menu Setting the video signal format2. To select “3.58NTSC” Checking the frequencies, polarities of input signals, and resolution » SIGNAL INFO. Menu3. Once you have checked the frequency SIGNAL INFOComputer input signals supported by this system TABLE OF SIGNALS SUPPORTED7 Other screen modes LTR BOX and VRTWIDE are available as well With digital input some signals are not acceptedIf you are connecting a composite sync signal, use the HD terminal SYMPTOM TROUBLESHOOTINGCHECKS REMEDY3.875 DIMENSIONS41.250 42 diagonalNative Resolution SPECIFICATIONSPower Requirements Power ConsumptionPage Page Ph 510 324-7777 / Fax 510 1-800-23RUNCO RUMA-010400 01-17-06Runco International 2900 Faber Street Union City, CA