OSD On Screen Display Controls, Main Menu, Sub Menu, Functions

OSD (On Screen Display) Controls

Main Menu	Sub Menu		Functions	Default	Reset

			RGB (VGA signals), VIDEO (Moving picture), WIDE (Wide VGA), DTV.

	HD TYPE		Sets the digital broadcasting (1080A, 1080B, 1080C) or the High Vision (1035I).	1080B	No

	INPUT SKIP		Skips over signals which are not present.	OFF	Yes

	FACTORY		Resets all the settings (PICTURE ADJ, AUDIO, IMAGE OPT, INSTALL 1-3,	--	--
			etc.) to the factory default values.

Main Menu	Sub Menu		Functions	Default	Reset

INSTALL 2	AUTO OFF		Sets the monitor for use as an energy-saving display when used with a computer.	OFF	Yes

	CINEMA MODE		Sets the picture to suit the movie.	ON	Yes

	PDP PROTECT	LUM. SETTING	Limits screen brightness to reduce burn-in on the display.	AUTO	Yes

		ORBITER	Moves the picture intermittently.	OFF	Yes

		INVERSE	Displays a negative/positive inverse image or an all-white screen.	OFF	Yes

		IMAGE SWEEP	Sweeps the screen with a white vertical bar.	OFF	Yes

		SOFTEN	Softens the detail in 4 steps (1-4)	OFF	Yes

	SIDEBAR ADJ		In case of 4:3, sets the luminance of both sides.	3	Yes

	S1/S2		Resizes the S-video image to best ﬁt the display.	OFF	Yes

Main Menu	Sub Menu		Functions	Defaults	Reset

INSTALL 3	TIMER	PRESENT TIME	Sets the day of the week and the time.	--	No

		PROGRAM	Sets the ON/OFF time for switching on the power and the input mode.	OFF	Yes

	INPUT SELECT		Sets the input mode at the time the power is switched on.	LAST	Yes

	CONTROL LOCK		Disables the function of the front panel buttons.	OFF	Yes

	IR ENABLE		Disables the transmission of the remote control.	ON	Yes

	LOOP OUT		When set to ON, the received signal will be looped out.	OFF	Yes

Main Menu	Sub Menu		Functions	Default	Reset

		ID NUMBER	Sets ID number for the display.	ALL	Yes

	VIDEO WALL	DIVIDER	Creates a 2x2 or 3x3 video wall.	OFF	Yes
		POSITION	Sets the position.	--	--
		DISP. MODE	Selects the screen mode from between Splitting and Blanking.	SPLIT	Yes

		AUTO ID	Automatically sets the ID number of multiple displays.	OFF	Yes

		IMAGE OPT	Adjusts the position of the image, etc.	--	--

		P. ON DELAY	When set to ON, each display turns on after a delay time.	OFF	Yes

		LUM SET	Sets a uniform brightness for each display.	OFF	Yes
		LINK
		REPEAT-	Sets two programmable timers.	OFF	Yes
		TIMER

Main Menu	Sub Menu		Functions	Default	Reset

LANGUAGE			Sets the language of the menus (English, German, French, Italian, Spanish).	English	No

COLOR			Sets the VIDEO format (AUTO, PAL, PAL-M, PAL-N, PAL60, SECAM, 4.43	AUTO	No
SYSTEM			NTSC or 3.59 NTSC).
SIGNAL INFO.			Used to check the frequency and synchronizing polarities of the active signal	--	--
			being input.

*1 AUDIO INPUT 1: VIDEO 1 AUDIO INPUT 2: HD/DVD1 AUDIO INPUT 3: RGB1 *2 RGB/PC only

Runco CW-42i manual OSD On Screen Display Controls, Main Menu, Sub Menu, Functions, Default, Reset