Manuals / Runco / Computer Equipment / Computer Monitor

Runco CW-42i Part Names And Functions, » Front View 1 POWER, Power, Input Select / Exit, Menu

Models: CW-42i

1 70

Download 70 pages 841 b

Page 10

Image 10

PART NAMES AND FUNCTIONS

» Front View

1POWER

Turns the plasma monitor’s power on and off.

2 REMOTE SENSOR WINDOW Receives the signals from the remote control.

3 POWER

When the power is on it will light GREEN. When the power is on the standby mode, it will light RED.

4INPUT SELECT / EXIT

Switches the input, in the following order. The available inputs depend on the setting of “BNC INPUT”.

RGB:	VIDEO1			VIDEO2 VIDEO3		HD/COMP/DTV
RGB:	VIDEO1			VIDEO2 VIDEO3		HD/COMP/DTV
		RGB/PC3		RGB/PC2	RGB/PC1
		RGB/PC3		RGB/PC2	RGB/PC1
COMP:			VIDEO1	VIDEO2	VIDEO3	HD1/COMP1/DTV1
COMP:			VIDEO1	VIDEO2	VIDEO3	HD1/COMP1/DTV1
			RGB/PC2	RGB/PC1	HD2/COMP2/DTV2

5LEFT/- and RIGHT/+

Enlarges or reduces the image. Functions as the CURSOR ( / ) buttons in the On-Screen Display (OSD) mode.

6VOLUME DOWN and UP

Adjusts the volume. Functions as the CURSOR ( / ) buttons in the On-Screen Menu mode.

7MENU

Sets the On-Screen Menu mode and displays the main menu.

Located on bottom of Plasma

VOLUME				INPUT SELECT
MENU / ENTER DOWN	UP	LEFT/-	RIGHT/+	/EXIT

Located on bottom of Plasma

Page 10

Image 10

Runco CW-42i manual Part Names And Functions, » Front View 1 POWER, Power, Input Select / Exit, LEFT/- and RIGHT/+, Menu

Contents

Flat Panel Plasma Display Monitor CW-42iOWNER’S OPERATING MANUAL withPage How to Attach Options to the Plasma Monitor TABLE OF CONTENTSLimited Warranty InstallationINTRODUCTION » The features you’ll enjoy includeContents of the package Options» Warnings and Safety Precautions » PrecautionsIMPORTANT INFORMATION » To avoid damage and prolong operating life » Plasma monitor cleaning procedureNOTE BURN-INS ARE NOT COVERED BY THE WARRANTY Recommendations to avoid or minimize phosphor burn-inWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY LIMITED WARRANTYWHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY TO AVOID IMAGE BURN-INCONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE EFFECTIVE WARRANTY DATEIMPORTANT WARRANTY REGISTRATION RIGHTS, LIMITS AND EXCLUSIONSHOW TO ATTACH OPTIONS TO THE PLASMA MONITOR Ventilation Requirements for enclosure mounting3 POWER » Front View 1 POWER2 REMOTE SENSOR WINDOW Receives the signals from the remote control 6 VOLUME DOWN and UPD AUDIO1, AUDIO2, AUDIO3 A AC INC VIDEO 1,2,3 BNC, RCA, S-Video E DVD1 / HD12 MENU » Plasma Remote Control 1 ON/OFFVOLUME + 3 CURSOROVERALL FUNCTIONAL DESCRIPTION DIGITAL INPUTS DVD 1 / HD1» Plasma Connection Examples INSTALLATIONVCR or Laser Disc Player » Connecting Your VCR or Laser Disc Player » Connecting Your PC or Macintosh Computer» Connecting Your DVD Player Installation » Pin Conﬁguration of the RGB3 Connector DVI Connector» Pin Assignments for 15-pin RGB analog Pin No» MUTE To cancel the sound » POWER To turn the unit ON and OFF» VOLUME To adjust the sound volume » DISPLAY To check the settings» Aspect Ratio Operations Manual When viewing videos or DVDsASPECT RATIO CONTROLS LTR BOX modeSTD 43 mode 43 or SXGA » Wide Screen Operation with Computer Signals2. Within 3 seconds ANAMPHC modeOSD ON SCREEN DISPLAY CONTROLS » Menu OperationsADJUST DefaultReset DefaultINSTALL DefaultReset INSTALL» PICTURE ADJUST Menu Adjusting the picture If “CAN NOT ADJUST” appears3. To set to “CUSTOM1” Setting the picture mode according to the brightness of the room4. Once the adjustment is completed Types of picture modesVIDEO NR 4. Once the setting is completedReducing noise in the picture Types of noise reduction5400K Setting the KELVIN4. Once the setting is completed RedderPerform the following operations Adjusting the Color to the Desired Level7. Once the adjustment is completed Perform Steps 1-3 of KELVIN, then4. Once the setting is completed Making the DITHER AdjustmentsChanging the GAMMA 4. Once the setting is completedPerform the following operations Adjusting the Colors5. Once the setting is completed SEL. ADJ. EXIT RETURNAudio setup menu To continue adjusting the audio ... Repeat from step» AUDIO Menu Restoring the factory default settings4. Once the adjustment is completed Setting the allocation of the audio connectors3. To set the AUDIO INPUT1 to “VIDEO1” OSD On Screen Display Controls4. Once all adjustments are completed 2. To adjust the vertical positionTo continue making other computer image adjustments » IMAGE OPTIONS MenuAdjusting the position of the image When “COMPUTER” is offAdjusting the COMPUTER Restoring the factory defaults settings4. To set the DISPLAY OSD to “OFF” » INSTALL 1 Menu Setting the on-screen menu5. Once the setting is completed 4. Once the setting is completed Setting the BNC connectors3. To set the BNC INPUT mode to “COMP” INSTALL3. To set the RGB select mode to “AUTO” Checking the signal being transmitted to RGB1 terminalSetting a computer image to the correct RGB select screen 4. Once the setting is completed4. Once the setting is completed Setting high deﬁnition images to the suitable screen size3. To set the HD TYPE mode to “1080B” Restoring the factory default settings4. Once the setting is completed Setting the Input Skip3. To set the INPUT SKIP mode to “OFF” INSTALL4. Once the setting is completed Resetting to the default valuesFACTORY 4. Once the setting is completed » INSTALL 2 Menu Setting the Auto Off for computer images3. To turn the Auto Off function on INSTALL4. Once the setting is completed POWER / STANDBY indicatorSetting the picture to suit the movie OSD On Screen Display ControlsLUM. SETTING 4. Once the setting is completedLUM. SETTING Luminance Setting OSD On Screen Display ControlsORBITER settings Adjust the ORBITER function manuallyORBITER ORBITER FUNCTION settingsINVERSE Setting the time for INVERSE6. Once the setting is completed Perform Steps 1-2 of PDP PROTECT, thenPerform Steps 1-3 of IMAGE SWEEP, then Setting the time for IMAGE SWEEP Set a time duration and the speedIMAGE SWEEP 6. Once the setting is completed3. To adjust the “SIDEBAR ADJ” Setting the SIDEBAR ADJ. for the sides of the screenSOFTEN 3.To set PLUG/PLAY mode to “STB/DVD” Setting the screen size for S1/S2 video inputSetting the signal and black level for DVI signal 4. Once the setting is completedPRESENT TIME » INSTALL 3 Menu Using the timerPerform Steps 1-2 of TIMER, then Perform the following operationsPerform Steps 1-2 of TIMER, then PROGRAM TIMER5. Once the setting is completed PRESENT TIME settingsPROGRAM TIMER settings Setting the DEFAULT INPUT4. Once the setting is completed To reset the program4. Once the setting is completed Enabling/disabling the front panel controlsTo set the CONTROL LOCK to “ON” CONTROL LOCK settingsLoop Out Setting Enabling/disabling remote control wireless transmissionTo set the IR ENABLE to “OFF” the screen, then3. To set the ID NUMBER to “O2” ID Number SettingTo set the ID number for the remote control Perform the following operationsPerform the following operations Video Wall Setting4. Once the setting is completed VIDEO WALLPOSITION DIVIDERPerform Steps 1-2 of VIDEO WALL, then DIVIDER settingsAUTO ID DISP. MODEPerform Steps 1-2 of VIDEO WALL, then 6. Once the setting is completed IMAGE ADJUSTP. ON DELAY Power on delay P. ON DELAY settingsPerform Steps 1-2 of VIDEO WALL, then LUM SET LINKLUM SET LINK settings OSD On Screen Display ControlsPerform Steps 1-2 of VIDEO WALL, then REPEAT TIME REPEAT6. Once the setting is completed REPEAT TIME3. Once the setting is completed » LANGUAGE Menu Setting the language for the menus2. To select “DEUTSCH” 2. To select “3.58NTSC” » COLOR SYSTEM Menu Setting the video signal format3. Once the setting is completed 3. Once you have checked the frequency » SIGNAL INFO. MenuChecking the frequencies, polarities of input signals, and resolution SIGNAL INFOTABLE OF SIGNALS SUPPORTED Computer input signals supported by this systemIf you are connecting a composite sync signal, use the HD terminal With digital input some signals are not accepted7 Other screen modes LTR BOX and VRTWIDE are available as well CHECKS TROUBLESHOOTINGSYMPTOM REMEDY41.250 DIMENSIONS3.875 42 diagonalPower Requirements SPECIFICATIONSNative Resolution Power ConsumptionPage Page Runco International 2900 Faber Street Union City, CA RUMA-010400 01-17-06Ph 510 324-7777 / Fax 510 1-800-23RUNCO