Manuals / Runco / Computer Equipment / Computer Monitor

Runco CW-42i OSD On Screen Display Controls, Plasma Display Panel Protection PDP PROTECT, Auto

Models: CW-42i

1 70

Download 70 pages 841 b

Page 42

Plasma Display Panel Protection (PDP PROTECT)

OSD (On Screen Display) Controls

Plasma Display Panel Protection (PDP PROTECT)

Reducing burn-in of the screen

The brightness of the screen, the position of the picture, positive/negative mode and image sweep are adjusted to reduce burn-in of the screen.

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “INSTALL 2”, then press the MENU button. The “INSTALL 2” menu appears.

2.Use the and buttons to select “PDP PROTECT”, then press the MENU button. The “PDP PROTECT” screen appears.

PDP PROTECT

LUM. SETTING

ORBITER

INVERSE IMAGE SWEEP SOFTEN

: AUTO

:OFF

:OFF

:OFF

:OFF

SEL.

ADJ.

EXIT RETURN

3.Set the PDP PROTECT mode using and buttons. See page 40 to set LUM. SETTING

See page 41 to set ORBITER. See page 42 to set INVERSE.

See page 43 to set IMAGE SWEEP.

Information

■ Restoring the factory default settings

Select “FACTORY” under the INSTALL 1 menu.

Note that this also restores other settings to the factory defaults.

4.Once the setting is completed...

Press the EXIT button to return to the INSTALL 2 screen.

To return to the main menu, press the EXIT button once more.

LUM. SETTING (Luminance Setting)

Use this to activate the brightness limiter.

Example: Setting “LUM. SETTING” to “SET. 1”

Perform Steps 1-2 of PDP PROTECT, then...

3.Use the and buttons to select “LUM SETTING” (relates to above)

4.Use the and buttons to select “SET. 1”.

The mode switches as follows each time the or button is pressed:

AUTO SET. 1 SET. 2 SET. 3

PDP PROTECT


	LUM. SETTING		:	AUTO
	ORBITER		:	OFF
	INVERSE		:	OFF
	IMAGE SWEEP		:	OFF
	SOFTEN		:	OFF
	SEL.	ADJ.		EXIT RETURN

Information
■ LUM. SETTING
AUTO	The brightness of the screen is adjusted automatically to suit the picture quality.

SET. 1, 2, 3 .... Sets maximum brightness. The brightness level decreases in the order of SET. 1, 2, 3.

SET. 3 provides minimum brightness.

40

Image 42

Runco CW-42i OSD On Screen Display Controls, Plasma Display Panel Protection PDP PROTECT, Reducing burn-in of the screen

Contents

Flat Panel Plasma Display Monitor CW-42iOWNER’S OPERATING MANUAL withPage How to Attach Options to the Plasma Monitor TABLE OF CONTENTSLimited Warranty InstallationINTRODUCTION » The features you’ll enjoy includeContents of the package Options» Precautions » Warnings and Safety PrecautionsIMPORTANT INFORMATION » To avoid damage and prolong operating life » Plasma monitor cleaning procedureNOTE BURN-INS ARE NOT COVERED BY THE WARRANTY Recommendations to avoid or minimize phosphor burn-inWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY LIMITED WARRANTYWHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY TO AVOID IMAGE BURN-INCONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE EFFECTIVE WARRANTY DATEIMPORTANT WARRANTY REGISTRATION RIGHTS, LIMITS AND EXCLUSIONSHOW TO ATTACH OPTIONS TO THE PLASMA MONITOR Ventilation Requirements for enclosure mounting3 POWER » Front View 1 POWER2 REMOTE SENSOR WINDOW Receives the signals from the remote control 6 VOLUME DOWN and UPD AUDIO1, AUDIO2, AUDIO3 A AC INC VIDEO 1,2,3 BNC, RCA, S-Video E DVD1 / HD12 MENU » Plasma Remote Control 1 ON/OFFVOLUME + 3 CURSOROVERALL FUNCTIONAL DESCRIPTION DIGITAL INPUTS DVD 1 / HD1INSTALLATION » Plasma Connection ExamplesVCR or Laser Disc Player » Connecting Your PC or Macintosh Computer » Connecting Your VCR or Laser Disc Player» Connecting Your DVD Player Installation » Pin Conﬁguration of the RGB3 Connector DVI Connector» Pin Assignments for 15-pin RGB analog Pin No» MUTE To cancel the sound » POWER To turn the unit ON and OFF» VOLUME To adjust the sound volume » DISPLAY To check the settings» Aspect Ratio Operations Manual When viewing videos or DVDsASPECT RATIO CONTROLS LTR BOX modeSTD 43 mode 43 or SXGA » Wide Screen Operation with Computer Signals2. Within 3 seconds ANAMPHC modeOSD ON SCREEN DISPLAY CONTROLS » Menu OperationsADJUST DefaultReset DefaultINSTALL DefaultReset INSTALL» PICTURE ADJUST Menu Adjusting the picture If “CAN NOT ADJUST” appears3. To set to “CUSTOM1” Setting the picture mode according to the brightness of the room4. Once the adjustment is completed Types of picture modesVIDEO NR 4. Once the setting is completedReducing noise in the picture Types of noise reduction5400K Setting the KELVIN4. Once the setting is completed RedderPerform the following operations Adjusting the Color to the Desired Level7. Once the adjustment is completed Perform Steps 1-3 of KELVIN, then4. Once the setting is completed Making the DITHER AdjustmentsChanging the GAMMA 4. Once the setting is completedPerform the following operations Adjusting the Colors5. Once the setting is completed SEL. ADJ. EXIT RETURNAudio setup menu To continue adjusting the audio ... Repeat from step» AUDIO Menu Restoring the factory default settings4. Once the adjustment is completed Setting the allocation of the audio connectors3. To set the AUDIO INPUT1 to “VIDEO1” OSD On Screen Display Controls4. Once all adjustments are completed 2. To adjust the vertical positionTo continue making other computer image adjustments » IMAGE OPTIONS MenuAdjusting the position of the image When “COMPUTER” is offAdjusting the COMPUTER Restoring the factory defaults settings» INSTALL 1 Menu Setting the on-screen menu 4. To set the DISPLAY OSD to “OFF”5. Once the setting is completed 4. Once the setting is completed Setting the BNC connectors3. To set the BNC INPUT mode to “COMP” INSTALL3. To set the RGB select mode to “AUTO” Checking the signal being transmitted to RGB1 terminalSetting a computer image to the correct RGB select screen 4. Once the setting is completed4. Once the setting is completed Setting high deﬁnition images to the suitable screen size3. To set the HD TYPE mode to “1080B” Restoring the factory default settings4. Once the setting is completed Setting the Input Skip3. To set the INPUT SKIP mode to “OFF” INSTALLResetting to the default values 4. Once the setting is completedFACTORY 4. Once the setting is completed » INSTALL 2 Menu Setting the Auto Off for computer images3. To turn the Auto Off function on INSTALL4. Once the setting is completed POWER / STANDBY indicatorSetting the picture to suit the movie OSD On Screen Display ControlsLUM. SETTING 4. Once the setting is completedLUM. SETTING Luminance Setting OSD On Screen Display ControlsORBITER settings Adjust the ORBITER function manuallyORBITER ORBITER FUNCTION settingsINVERSE Setting the time for INVERSE6. Once the setting is completed Perform Steps 1-2 of PDP PROTECT, thenPerform Steps 1-3 of IMAGE SWEEP, then Setting the time for IMAGE SWEEP Set a time duration and the speedIMAGE SWEEP 6. Once the setting is completedSetting the SIDEBAR ADJ. for the sides of the screen 3. To adjust the “SIDEBAR ADJ”SOFTEN 3.To set PLUG/PLAY mode to “STB/DVD” Setting the screen size for S1/S2 video inputSetting the signal and black level for DVI signal 4. Once the setting is completedPRESENT TIME » INSTALL 3 Menu Using the timerPerform Steps 1-2 of TIMER, then Perform the following operationsPerform Steps 1-2 of TIMER, then PROGRAM TIMER5. Once the setting is completed PRESENT TIME settingsPROGRAM TIMER settings Setting the DEFAULT INPUT4. Once the setting is completed To reset the program4. Once the setting is completed Enabling/disabling the front panel controlsTo set the CONTROL LOCK to “ON” CONTROL LOCK settingsLoop Out Setting Enabling/disabling remote control wireless transmissionTo set the IR ENABLE to “OFF” the screen, then3. To set the ID NUMBER to “O2” ID Number SettingTo set the ID number for the remote control Perform the following operationsPerform the following operations Video Wall Setting4. Once the setting is completed VIDEO WALLPOSITION DIVIDERPerform Steps 1-2 of VIDEO WALL, then DIVIDER settingsDISP. MODE AUTO IDPerform Steps 1-2 of VIDEO WALL, then 6. Once the setting is completed IMAGE ADJUSTP. ON DELAY Power on delay P. ON DELAY settingsPerform Steps 1-2 of VIDEO WALL, then LUM SET LINKLUM SET LINK settings OSD On Screen Display ControlsPerform Steps 1-2 of VIDEO WALL, then REPEAT TIME REPEAT6. Once the setting is completed REPEAT TIME» LANGUAGE Menu Setting the language for the menus 3. Once the setting is completed2. To select “DEUTSCH” » COLOR SYSTEM Menu Setting the video signal format 2. To select “3.58NTSC”3. Once the setting is completed 3. Once you have checked the frequency » SIGNAL INFO. MenuChecking the frequencies, polarities of input signals, and resolution SIGNAL INFOTABLE OF SIGNALS SUPPORTED Computer input signals supported by this systemWith digital input some signals are not accepted If you are connecting a composite sync signal, use the HD terminal7 Other screen modes LTR BOX and VRTWIDE are available as well CHECKS TROUBLESHOOTINGSYMPTOM REMEDY41.250 DIMENSIONS3.875 42 diagonalPower Requirements SPECIFICATIONSNative Resolution Power ConsumptionPage Page RUMA-010400 01-17-06 Runco International 2900 Faber Street Union City, CAPh 510 324-7777 / Fax 510 1-800-23RUNCO