II
THREADING TOP THREAD
Fig, 1
A
D
Fig. 2
1.Raise slotted
Place thread spool onto spool pin. Place appropriate spool cap over the spool of thread.
Draw thread through rear thread guide
(A)and into threading channel (B) toward you. (Fig. 1)
2.Draw thread down and around check spring (C) and up through slotted
3.Draw thread down into thread guides (E) and (F). Thread needle from front to back
as shown in Fig. 3.
\
\
Fig. 3
THREADING DOUBLE NEEDLE
Place second spool of thread on second spool pin, and thread machine as you would for a single needle except double thread
guides are provided, Draw one thread
through each of these and through each side of needle from front to back.
0