° ELECTRONIC NEEDLE CONTROL
Your machine is electronically controlled to stop with the needle in the up position every time you remove pressure from foot control.
NEEDLE UP/DOWN SWITCH
When you want to lower the needle, push the left switch and the needle will move to
the down position with red light turned on. Push it again or activate the foot control and the light will disappear to indicate the cancellation of needle down position and the needle will move back to the up position.
BASTING SWITCH
Tap the foot control with the right switch pushed and lighted and the machine will take one stitch only and stop with needle in the up position. This feature provides
an electronically controlled basting or tacking to take the chore out of hand basting.
. MAXIMUM SPEED CONTROL
You may want to vary the speed of the machine, sewing slowly in special tight places or if you are a new seamstress.
This control can be moved to the left to slow the sewing of the machine. To increase to the maximum speed, slide the control to the right.
, ACCESSORY BOX
Accessory box is opened by lifting the lid up and swinging it toward you as shown. Inside you will find many of the acces- sories that you use each time you sew.
The box may be fully removed from the
machine to convert it for free arm
stitching. See page 8.
Electronic needle control
i._°II
electronic
in
0 0 0
111III°11II1 1
d"
_J_Decrease Increase
Maximum speed control
4
