LEFT HOLE
OF
BUTTON
I I
PRESSER
FOOT
I
STRAIGHT
SEAMLINE
I
BUTTON
il
BUTTON SEWING
SIitch
SIitch Width - Adjust to Button Size
USe Feed Cover Plate and Clear Plastic Satin Stitch Foot.
11, Position the button on fabric with clear
tape.
2_ Center the left hole of button between
straight seamline and the left edge of needle slot of foot and lower foot to hold
the button securely.
Turn hand wheel manually until needle point is just above button.
4_ Adjust stitch width control so needle will enter right hole of the button.
5 .i Turn hand wheel again by hand so needle enters second hole. Readjust stitch width if necessary. Stitch a number of times.
6_ Finish sewing with an extra two inches of thread remaining. Draw these threads to reverse side of garment and tie.
V_hen sewing a flat button, place needle or
pi_ between holes of button as shown to brbvide flexibility for buttoning.
35