Runco CW-42i manual Enabling/disabling the front panel controls, To set the CONTROL LOCK to “ON”

OSD (On Screen Display) Controls

Information
■ INPUT SELECT settings
LAST	Last mode (the mode that was last selected at the time the power was switched off).
VIDEO 1, 2, 3	VIDEO input mode.
RGB 1, 2, 3	RGB input mode.
HD 1, 2	HD/DVD input mode.

■ Restoring the factory default settings

Select “FACTORY” under the INSTALL 1 menu.

Note that this also restores other settings to the factory defaults.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.

Example: Setting “ON”

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.	Use the	and	buttons to select “INSTALL 3”, then press
					INSTALL 3				3 / 3
the MENU button. The “INSTALL 3” screen appears.
					PREVIOUS PG
2.	Use the	and	buttons to select “CONTROL LOCK”.		TIMER
					INPUT SELECT		:	LAST
					CONTROL LOCK		:	OFF
3.	To set the CONTROL LOCK to “ON”...				IR ENABLE		:	ON
					LOOP OUT		:	OFF
Use the		and	buttons to select “ON”, then press the MENU button.	ON	ID NUMBER		:	ALL
The mode switches as follows each time the or button is pressed: OFF					VIDEO WALL
					SEL.	ADJ.		EXIT RETURN

4.Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

■ CONTROL LOCK settings

ON	Disables the buttons on the front panel.
OFF	Enables the buttons on the front panel.

*Even when the CONTROL LOCK is set, the POWER switch will not be locked.

*This becomes effective when the on-screen menu goes out.

49