Runco CW-42i manual Soften, Setting the SIDEBAR ADJ. for the sides of the screen

OSD (On Screen Display) Controls

SOFTEN

Reduces edges and softens the image.

Example: Setting “SOFTEN” to “2”

3.Use the and buttons to select “SOFTEN”.

4.Use the and button to select “2”. The mode switches as follows each time the or button is pressed: 1 2 3 4 5

PDP PROTECT

LUM. SETTING		:	AUTO
ORBITER		:	OFF
INVERSE		:	OFF
IMAGE SWEEP		:	OFF
SOFTEN		:	OFF
SEL.	ADJ.		EXIT RETURN

Information

■ SOFTEN settings

OFF ........ Turns the SOFTEN function off.

1,2,3,4 .....Activates the SOFTEN setting. The higher numbers

create a softer image.

“SHARPNESS” can not be adjusted on the “PICTURE ADJUST” menu.

Setting the SIDEBAR ADJ. for the sides of the screen

UsethisproceduretosettheSidebarAdj. for thepartsonthescreenonwhichnothingisdisplayedwhenthescreenissetto 4:3 size.

Example: Adjusting the “SIDEBAR ADJ”

Perform the following operations.

1.On the MAIN MENU, select “INSTALL 2”, then press the MENU button. The “INSTALL 2” menu appears.

2.Use the and buttons to select “SIDEBAR ADJ”.

3.To adjust the “SIDEBAR ADJ” ...

Use the and buttons to adjust the SIDEBAR ADJ

Information

■ SIDEBAR ADJ. settings

This adjusts the brightness of the black (the Sidebar Adj.) for the sides of the screen. The standard is 0 (black). The level can be adjusted from 0 to 15. The factory setting is 3 (dark gray).

■ Restoring the factory default settings

Select “FACTORY” under the INSTALL 1 menu.

Note that this also restores other settings to the factory defaults.

44