Runco CW-42i Setting the allocation of the audio connectors, To set the AUDIO INPUT1 to “VIDEO1”

OSD (On Screen Display) Controls

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired input.

Example: Setting “AUDIO INPUT1” to “VIDEO1”

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “AUDIO”, then press the MENU button. The “AUDIO” screen appears.

2.Use the and buttons to select “AUDIO INPUT1”.

3.To set the AUDIO INPUT1 to “VIDEO1”...

Use the and buttons to select “VIDEO1”.

The mode switches as follows each time the and buttons is pressed: The available sources depend on the setting of “BNC INPUT”.

RGB: → VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD1 ← → RGB3 ↔ RGB2 ↔ RGB1 ←

COMP: → VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ← → RGB3 ↔ RGB1 ↔ HD/DVD2 ←

AUDIO

BASS

TREBLE

BALANCE

AUDIO INPUT1

AUDIO INPUT2 AUDIO INPUT3

0

0

0

:VIDEO 1

:HD/DVD 1

:RGB 1

SEL. ADJ. EXIT RETURN

4. Once the adjustment is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

■ AUDIO INPUT

A single audio input cannot be selected as the audio channel for more than one input terminal.

■ Restoring the factory default settings

Select “FACTORY” under the INSTALL 1 menu.

Note that this also restores other settings to the factory defaults.

29